NEW - STATE OF THE
ART - ECONOMICAL- PORTABLE, 2" x 2" WELDED MESH
New square tube frame
design provides 30% more strength.
B664 Shown with optional
shade cloth (total weight - approximately 74 lbs.)
B664 Shown with optional soft peaked cover (total
weight - approximately 82 lbs.)
B886MT enclosed top dog kennel 6
ft high with mesh top panels (total weight - approximately 225
lbs.)
The Bronze Series B664 can
be setup into many different configurations to suit your needs.
The light-weight3 ft. x
4 ft panels make transportation easy and the kennel can be setup
in under 30 minutes! A single B6648-pack
can be used to make exercise pens and many different dog kennel
configurations! Multiple panels can be configured 3 ft, 4 ft,
6 ft and 8 ft high when stacked.
The enhancements included within this dog kennel design provide pet protection
from sharp wire ends and the many protrusions that other kennel
manufacturers offer. The black powder-coated, 11 gauge hardened
steel wire is welded at each 2" x 2" intersection before
powder-coating to ensure lasting beauty and security. No wire
loops of chain link that can catch and remove pet hairs. The
3/4 inch square tube frame is welded to the wire mesh to ensure
lasting strength. Our bracket attachment system makes assembly
a breeze and you can have your kennel set-up in a minimum of
time. Expanding your kennel is easy as the modular sections bolt
together using only TWO bolts and connectors per panel! Panels
can be used to make your kennel either 3 ft. high or 4 ft. high,
your choice!
Shipping is free
within the Continental U.S. 48 States!
All
of our products are proudly made in the U.S.A.
The enhancements included within this dog kennel design provide pet protection
from sharp wire ends and the many protrusions that other kennel
manufacturers offer. The black powder-coated, 11 gauge hardened
steel wire is welded at each 2" x 2" intersection before
powder-coating to ensure lasting beauty and security. No wire
loops of chain link that can catch and remove pet hairs. The
3/4 inch square tube frame is welded to the wire mesh to ensure
lasting strength. Our bracket attachment system makes assembly
a breeze and you can have your kennel set-up in a minimum of
time. Expanding your kennel is easy as the modular sections bolt
together using only TWO bolts and connectors per panel! Panels
can be used to make your kennel either 3 ft. high or 4 ft. high,
your choice!
